上一篇主題 :: 下一篇主題 |
發表人 |
內容 |
kevinyc
註冊時間: 2009-10-21 文章: 8
|
發表於: 星期三 十二月 09, 2009 7:55 am 文章主題: Delonghi EC270 |
|
|
anyone has a comment for EC270?
EC155 and EC270 which one would u pick? |
|
回頂端 |
|
 |
CSX3
註冊時間: 2009-06-15 文章: 9
|
發表於: 星期四 十二月 10, 2009 1:47 pm 文章主題: |
|
|
I have the EC270 and it works fine and it looks better than the EC155. I dunno what's the technical difference between EC270 & EC155. However, the steam wand on the EC270 cannot be changed to the stainless steel one available from Landy.
EC270 can do a proper froth for latte art but I think it may be easier if you get the EC155 & change to the stainless steel wand from Landy. |
|
回頂端 |
|
 |
nelf
註冊時間: 2006-11-21 文章: 318
|
發表於: 星期五 十二月 11, 2009 2:09 am 文章主題: |
|
|
if EC270 cannot change steam wand.. i would prefer EC155 _________________ www.zooom.hk -- high speed file transfer |
|
回頂端 |
|
 |
kevinyc
註冊時間: 2009-10-21 文章: 8
|
發表於: 星期五 十二月 11, 2009 2:43 am 文章主題: |
|
|
thnaks CSX3,
How do u feel with the orginal steam wand? are u ok to make good proth with it?
i also find the filter buttom can be removed by taken out the rubber ... can it be use as nature filter then? |
|
回頂端 |
|
 |
CSX3
註冊時間: 2009-06-15 文章: 9
|
發表於: 星期五 十二月 11, 2009 4:36 pm 文章主題: |
|
|
I am able to froth properly & pour some latte arts with the original steam wand. It took me 4 months & cup a day to finally get the proper froth. Honestly, if you ask me I would get the EC155 instead because of the option to change the wand.
For the filter, it uses the same one as EC155 & 4020, so you can just the non pressurized filter from Landy. |
|
回頂端 |
|
 |
polestar
註冊時間: 2009-12-13 文章: 77
|
發表於: 星期日 十二月 13, 2009 8:45 am 文章主題: |
|
|
?????????EC270 ?latte arts ???????
?????EC270????, ????latte arts ????.
????????:
?????????????????1cm???, ??(300ml size) ????.
?????????????, ?????????????.
?????????, ??d???????, volume?????.
???40C???????, ????????????texturing.
???65C??????.
??:
????????, ????????, ??d??d??mix???. ?????????响???. |
|
回頂端 |
|
 |
CSX3
註冊時間: 2009-06-15 文章: 9
|
發表於: 星期日 十二月 13, 2009 2:39 pm 文章主題: |
|
|
After you have made the expresso, pour the cold milk into your pitcher. Turn on the steam button, wait for about 8 seconds and start frothing the milk BEFORE the steam button turns green. This will make the boiler keeps boiling while you are steaming the milk and the steam will be much stronger & consistent.
This is the one trick you must use to froth properly on the EC270.
You have hot milk at the bottom of the pitcher & foam on top because the steam is not strong enough to create a swirl all the time. Try this trick and you'll get much better froth.  |
|
回頂端 |
|
 |
polestar
註冊時間: 2009-12-13 文章: 77
|
發表於: 星期一 十二月 14, 2009 5:04 pm 文章主題: |
|
|
thx...??8??????, ?????????????? ??????????
?????tamper???filter??, ??52mm?tamper?? |
|
回頂端 |
|
 |
CSX3
註冊時間: 2009-06-15 文章: 9
|
發表於: 星期四 十二月 17, 2009 2:01 pm 文章主題: |
|
|
You should release the water in your steam wand before the 8 seconds trick. I believe the tamper should be 50.5mm, but I'm not sure as I got mine from landy and she knows the size. |
|
回頂端 |
|
 |
polestar
註冊時間: 2009-12-13 文章: 77
|
發表於: 星期一 十二月 21, 2009 4:45 pm 文章主題: |
|
|
??????, ??????. ????:
- ???????, 8?????????????, ????.
- ???steam???????, ????, ???????, ????????65C (<=20?), ??????.
??:
- ???????, ???????????1cm?????????
- ??SiSi??????????, ???????? (????????????), ???????????????????
- ?????????, ?????????, ???????????.????????????????. ?????????????
- ??????, ???????????????
??!! |
|
回頂端 |
|
 |
|
|
您 無法 在這個版面發表文章 您 無法 在這個版面回覆文章 您 無法 在這個版面編輯文章 您 無法 在這個版面刪除文章 您 無法 在這個版面進行投票
|
|