| 上一篇主題 :: 下一篇主題 |
| 發表人 |
內容 |
danielc
註冊時間: 2006-12-08
文章: 19
|
 發表於: 星期五 十二月 08, 2006 10:15 am 文章主題: grindenstein knockbox |
 |
|
Hi guys,
i just found this knockbox in coffeegeek.
https://www.grindenstein.com/
seems ok and not too expensive.
anyone seen it in HK? just dun wanna order online....
thx
daniel |
|
| 回頂端 |
|
 |
neohk
註冊時間: 2006-09-03
文章: 1095
|
| 發表於: 星期五 十二月 08, 2006 10:21 am 文章主題: Re: grindenstein knockbox |
|
|
| danielc 寫到: | Hi guys,
i just found this knockbox in coffeegeek.
https://www.grindenstein.com/
seems ok and not too expensive.
anyone seen it in HK? just dun wanna order online....
thx
daniel |
what is the use of knockbox? 
_________________
        |
|
| 回頂端 |
|
|
kckc
註冊時間: 2006-03-15
文章: 1918
|
| 發表於: 星期五 十二月 08, 2006 10:23 am 文章主題: Re: grindenstein knockbox |
|
|
| danielc 寫到: | Hi guys,
i just found this knockbox in coffeegeek.
https://www.grindenstein.com/
seems ok and not too expensive.
anyone seen it in HK? just dun wanna order online....
thx
daniel |
I think it is too small that grinds will spill everywhere when knocking,
if you can arrange space for a larger knockbox, seems the Bumper is suitable for you, in Hong Kong.
http://www.coffeebumper.com
 |
|
| 回頂端 |
|
|
danielc
註冊時間: 2006-12-08
文章: 19
|
| 發表於: 星期日 十二月 10, 2006 3:15 pm 文章主題: |
|
|
Thx kckc, will check it out.
neohk, a knockbox is for used coffee grind disposal. |
|
| 回頂端 |
|
|
danielc
註冊時間: 2006-12-08
文章: 19
|
| 發表於: 星期四 十二月 14, 2006 3:48 am 文章主題: Re: grindenstein knockbox |
|
|
| kckc 寫到: | | danielc 寫到: | Hi guys,
i just found this knockbox in coffeegeek.
https://www.grindenstein.com/
seems ok and not too expensive.
anyone seen it in HK? just dun wanna order online....
thx
daniel |
I think it is too small that grinds will spill everywhere when knocking,
if you can arrange space for a larger knockbox, seems the Bumper is suitable for you, in Hong Kong.
http://www.coffeebumper.com
|
the BUMPER knockbox is a bit expensive~ |
|
| 回頂端 |
|
|
kckc
註冊時間: 2006-03-15
文章: 1918
|
| 發表於: 星期四 十二月 14, 2006 8:53 am 文章主題: Re: grindenstein knockbox |
|
|
| danielc 寫到: | | kckc 寫到: | | danielc 寫到: | Hi guys,
i just found this knockbox in coffeegeek.
https://www.grindenstein.com/
seems ok and not too expensive.
anyone seen it in HK? just dun wanna order online....
thx
daniel |
I think it is too small that grinds will spill everywhere when knocking,
if you can arrange space for a larger knockbox, seems the Bumper is suitable for you, in Hong Kong.
http://www.coffeebumper.com
|
the BUMPER knockbox is a bit expensive~ |
icic,
infact you can diy a knock box using a mini sink?, and a plastic bar. |
|
| 回頂端 |
|
|
danielc
註冊時間: 2006-12-08
文章: 19
|
| 發表於: 星期四 十二月 14, 2006 2:40 pm 文章主題: |
|
|
kckc,
me no good in DIY la, clumsy hands.
u know the cheapest knockbox available?
i actually like bumper knockbox and their tamping stand, quite useful with single spout PF.
but the knockbox cost around HK$400, a bit steep for a non regular home user like me...... |
|
| 回頂端 |
|
|
shing
Site Admin
註冊時間: 2006-03-01
文章: 1100
|
| 發表於: 星期四 十二月 14, 2006 3:05 pm 文章主題: |
|
|
| $400. ok la. very beautiful ma. |
|
| 回頂端 |
|
|
Whittle
註冊時間: 2006-10-24
文章: 382
|
| 發表於: 星期四 十二月 14, 2006 3:11 pm 文章主題: |
|
|
?????? 3-Way Valve
????????? .....
?? knockbox ?????? ......
_________________
"??????????????????, ????????????????,??????????" ???"?????" P.43 |
|
| 回頂端 |
|
|
kckc
註冊時間: 2006-03-15
文章: 1918
|
| 發表於: 星期五 十二月 15, 2006 5:24 am 文章主題: |
|
|
| danielc 寫到: | kckc,
me no good in DIY la, clumsy hands.
u know the cheapest knockbox available?
i actually like bumper knockbox and their tamping stand, quite useful with single spout PF.
but the knockbox cost around HK$400, a bit steep for a non regular home user like me...... |
i think so,, a bit expensive for home user(not much coffee to knock)
but the shipping fee will add on a lot to the knock box price,
rather than buying the knock box directly in hong kong  |
|
| 回頂端 |
|
|
danielc
註冊時間: 2006-12-08
文章: 19
|
|
| 回頂端 |
|
|
Designer
註冊時間: 2006-09-09
文章: 205
來自: HK
|
| 發表於: 星期五 三月 02, 2007 4:59 pm 文章主題: |
|
|
| ?????bumper?? |
|
| 回頂端 |
|
|
danielc
註冊時間: 2006-12-08
文章: 19
|
| 發表於: 星期五 三月 02, 2007 5:04 pm 文章主題: |
|
|
| same design, but sunbeam is really solid, diecast metal vs. bumper sheet metal. |
|
| 回頂端 |
|
|
kckc
註冊時間: 2006-03-15
文章: 1918
|
| 發表於: 星期六 三月 03, 2007 10:02 am 文章主題: |
|
|
| danielc 寫到: | | same design, but sunbeam is really solid, diecast metal vs. bumper sheet metal. |
Congratulation!,
photo please 
Well, I don't much like diecast.(sorry! )
_________________
Eureka Mignon Hahaha |
|
| 回頂端 |
|
|
danielc
註冊時間: 2006-12-08
文章: 19
|
|
| 回頂端 |
|
|
|
常見問題
搜尋
會員列表
會員群組
會員註冊
個人資料
登入檢查您的私人訊息
登入
