coffee forum, ?????, ?????, fresh coffee beans and tea house 首頁 coffee forum, ?????, ?????, fresh coffee beans and tea house
??????, ??, ??????
 
 常見問題常見問題   搜尋搜尋   會員列表會員列表   會員群組會員群組   會員註冊會員註冊 
 個人資料個人資料   登入檢查您的私人訊息登入檢查您的私人訊息   登入登入 

Expobar ???????????

 
發表新主題   回覆主題    coffee forum, ?????, ?????, fresh coffee beans and tea house 首頁 -> ??????
上一篇主題 :: 下一篇主題  
發表人 內容
jackhkau



註冊時間: 2008-02-28
文章: 106

發表發表於: 星期三 七月 18, 2012 5:56 pm    文章主題: Expobar ??????????? 引言回覆

???????
?????pressurestat
??????






jackhkau 在 星期四 七月 19, 2012 12:35 am 作了第 1 次修改
回頂端
檢視會員個人資料 發送私人訊息
bib



註冊時間: 2007-04-21
文章: 786

發表發表於: 星期三 七月 18, 2012 8:28 pm    文章主題: 引言回覆

wow high tech ar...
but sorry to ask there is a 0.05bar dead band pressurestat.
electronic one more durable and better ?
Thanks for teaching.
0.05 bar pressurestat data sheet:
http://www.barksdale.com/download/?dl=505
mine is 0.2-0.3bar , due to the durable issue, I have given up the upgrade.
回頂端
檢視會員個人資料 發送私人訊息
jackhkau



註冊時間: 2008-02-28
文章: 106

發表發表於: 星期三 七月 18, 2012 9:58 pm    文章主題: 引言回覆

????????????
??PID ??????????d
???PID?????delay

??????0.80bar,????0.88bar
??98~99
???setting

???????PStat????
if you own a dual boiler machine, dont waste money to do upgrade like this.
It wont give you too much different.

Someone come with a "home made" pressure profile upgrade, which is great.

Ps .?????????expo bar ,?????????
回頂端
檢視會員個人資料 發送私人訊息
alexfan



註冊時間: 2008-09-18
文章: 266

發表發表於: 星期四 七月 19, 2012 6:43 am    文章主題: 引言回覆

Do you keep the original PSTAT (set to just higher than the PID pressure) in serial with the PID control (SSR) ? In case of the PID fail (always on), the PSTAT could be the final protection.
回頂端
檢視會員個人資料 發送私人訊息
jackhkau



註冊時間: 2008-02-28
文章: 106

發表發表於: 星期四 七月 19, 2012 10:41 am    文章主題: 引言回覆

It has a safety valve @ 2 bar something
I tested, no problem.
I foundD out inside no space to keep the original pstat.
Also You have to refit the copper tube.

Alexfan I like you pressure profile upgrade. Is it good?
回頂端
檢視會員個人資料 發送私人訊息
alexfan



註冊時間: 2008-09-18
文章: 266

發表發表於: 星期四 七月 19, 2012 9:50 pm    文章主題: 引言回覆

jackhkau 寫到:
It has a safety valve @ 2 bar something
I tested, no problem.
I foundD out inside no space to keep the original pstat.
Also You have to refit the copper tube.

Alexfan I like you pressure profile upgrade. Is it good?


Understand.

Yes, but do not have time to tune the PID and profile for the brewing pressure.
回頂端
檢視會員個人資料 發送私人訊息
bib



註冊時間: 2007-04-21
文章: 786

發表發表於: 星期五 七月 20, 2012 4:54 pm    文章主題: 引言回覆

for durable and simple pressurestat replacement 100,000 tested :

回頂端
檢視會員個人資料 發送私人訊息
從之前的文章開始顯示:   
發表新主題   回覆主題    coffee forum, ?????, ?????, fresh coffee beans and tea house 首頁 -> ?????? 所有的時間均為 台灣時間 (GMT + 8 小時)
1頁(共1頁)

 
前往:  
無法 在這個版面發表文章
無法 在這個版面回覆文章
無法 在這個版面編輯文章
無法 在這個版面刪除文章
無法 在這個版面進行投票


Powered by phpBB © 2001, 2005 phpBB Group
正體中文語系由 phpbb-tw 維護製作