| 上一篇主題 :: 下一篇主題 |
| 發表人 |
內容 |
Icarus
註冊時間: 2009-02-05
文章: 836
|
 發表於: 星期三 六月 24, 2009 9:58 pm 文章主題: Gaggia Baby "Enhancement" |
 |
|
???...Baby BUTTON DEAD~!!"
??Button 1 & 4 ?....
???, Button 1 ???? (????????)
????????, ?????
????????? (??, ??, ??, ??...)
 ?
????? 
Thanks, kkkwan ???????!!
Thanks, Shing ???????....??....??!!
_________________
????
???????????????????????????????????????????????
????????????????????
Icarus 在 星期五 六月 26, 2009 5:14 pm 作了第 1 次修改 |
|
| 回頂端 |
|
 |
Icarus
註冊時間: 2009-02-05
文章: 836
|
| 發表於: 星期五 六月 26, 2009 7:54 am 文章主題: Steam Pipe Enhancement |
|
|
????, ????, 啱?啱Baby ????
Steam Pipe #1 (Desc. Gaggia Steam Pipe[unknow which model])
Giggia Part No. LF:1449847-7-4
Weight 0.106 kg
Price US $26.41
Technical Description Fitting Ø 3/8"f
Total length: 10"
Top Elbow to Nozzle: 7"
Lower Elbow to Nozzle: 4"
Steam Pipe #2 (Desc. Rancilio Silvia Steam Pipe)
Weight 0.14 kg
Price US $31.55
Technical Description Fitting Ø 3/8"f
Total length: 7.5"
Top Elbow to Nozzle: 6"
Lower Elbow to Nozzle: 4"
_________________
????
???????????????????????????????????????????????
????????????????????
Icarus 在 星期五 六月 26, 2009 8:27 pm 作了第 2 次修改 |
|
| 回頂端 |
|
|
PSC
註冊時間: 2008-10-16
文章: 59
|
| 發表於: 星期五 六月 26, 2009 1:23 pm 文章主題: |
|
|
啱?????!  |
|
| 回頂端 |
|
|
harry
註冊時間: 2006-09-10
文章: 1367
來自: Hong Kong
|
| 發表於: 星期五 六月 26, 2009 4:43 pm 文章主題: Re: Stream Pipe Enhancement |
|
|
| Icarus 寫到: | ????, ????, 啱?啱Baby ????
Giggia Part No. LF:1449847-7-4
Weight 0.106 kg
Price $26.41
Technical Description Fitting Ø 3/8"f
Total length: 10"
Top Elbow to Nozzle: 7"
Lower Elbow to Nozzle: 4"
Weight 0.14 kg
Price $31.55
Technical Description Fitting Ø 3/8"f
Total length: 7.5"
Top Elbow to Nozzle: 6"
Lower Elbow to Nozzle: 4" |
if ok, ????! you try try la~
_________________
????B???.......
1. ???????????.........
2. ??厠??????????????.......
3. ??????????????....... |
|
| 回頂端 |
|
|
littlelittle
註冊時間: 2006-04-04
文章: 1725
|
| 發表於: 星期五 六月 26, 2009 4:49 pm 文章主題: Re: Stream Pipe Enhancement |
|
|
| harry 寫到: |
if ok, ????! you try try la~ |
me too me too~
_________________
 ??????? ???????
littlelittle 在 星期一 六月 29, 2009 2:22 am 作了第 1 次修改 |
|
| 回頂端 |
|
|
Icarus
註冊時間: 2009-02-05
文章: 836
|
| 發表於: 星期五 六月 26, 2009 6:58 pm 文章主題: |
|
|
????, Baby ????????Pipe??
Exploded Diag(???)
?? Steam Pipe ??
_________________
????
???????????????????????????????????????????????
????????????????????
Icarus 在 星期五 六月 26, 2009 7:37 pm 作了第 2 次修改 |
|
| 回頂端 |
|
|
Icarus
註冊時間: 2009-02-05
文章: 836
|
| 發表於: 星期五 六月 26, 2009 7:01 pm 文章主題: |
|
|
| PSC 寫到: | | 啱?????! |
Evolution ???????, ????baby ????
Evo. Exploded Diag
_________________
????
???????????????????????????????????????????????
???????????????????? |
|
| 回頂端 |
|
|
Icarus
註冊時間: 2009-02-05
文章: 836
|
| 發表於: 星期五 六月 26, 2009 7:04 pm 文章主題: |
|
|
harry & littlelittle,
????Remove replied ?? ?????
??Thread ????啲?? 
Thanks
_________________
????
???????????????????????????????????????????????
???????????????????? |
|
| 回頂端 |
|
|
Icarus
註冊時間: 2009-02-05
文章: 836
|
| 發表於: 星期五 六月 26, 2009 9:14 pm 文章主題: |
|
|
????
 ???咗??, ??????? 
| Coffee Nobs 寫到: | Gaggia Steam Wand Replacement Mod
Gaggia Steam Wand.
This is a quick picture guide on how to replace the steam wand on a Gaggia Carezza. This also probably applies to the classic and the evolution (or any of the Gaggia's with that stupid plastic frothing attachment) but I'm not 100% sure. I did it on the Carezza, so it's gospel for that. It's cheap too, so if it dosn't work you aren't out megabucks.........................
|
| CoffeeGreek 寫到: | you can also fit the silvia style steam wand on the machine. All Stainless Steel, single hole tip. There is also an adaptor so you can use thier three hole tip as well.
Ref. Source : Click Here
|
| Review Submitted by client after purchased on 05/28/2009 寫到: |
Review
i have used this to replace the panarello wand on my gaggia coffee, and think it works Wonders I could never get a textured foam with the panarello, now i can
|
????嘅?[url=http://hkcoffee.com/phpbb2/viewtopic.php?p=23418#23393]??? #2[/url]
???????????, ????
?? Model is Gaggia Baby Classic,
?? Baby / Evo. ????????
?????????? - Gaggia Classic Exploded Diag
===============================================
???????????, ?????????
???????, ?????????????????????
| Online shop 寫到: |
 
The Pannarello frothing sleeve is one the most widely used frothing attachments It is designed to make milk frothing easy and quick It does a great job but one of the most frequent complaints that I get is that the frothing sleeve wont stay on the steam wand It can get blown off the wand into the milk pitcher or it may even leak a little around the top of it There are a couple of small parts that can get lost during the cleaning process and cause this problem.
There are 6 parts that make up the frothing attachment The metal wand on the machine that this frothing attachment slides on to is called the steam wand.
Price: US$15 (shipping fee not included)
|
harry, PSC & littlelittle ?
????, ????????
Pipe or Long Pastic Wand
P.S.: ?????????????????, ????????????, ?????
???????, ?????, ??????
????????????????
_________________
????
???????????????????????????????????????????????
????????????????????
Icarus 在 星期六 六月 27, 2009 5:10 pm 作了第 1 次修改 |
|
| 回頂端 |
|
|
SoloC
註冊時間: 2008-04-25
文章: 76
|
| 發表於: 星期六 六月 27, 2009 1:07 am 文章主題: |
|
|
| Those plastic is the first thing I will taken off when if I have a machine that has it. Silvia steam wand for sure. Single hole no gimmick. |
|
| 回頂端 |
|
|
PSC
註冊時間: 2008-10-16
文章: 59
|
| 發表於: 星期二 六月 30, 2009 2:43 am 文章主題: |
|
|
| I don't like plastic too. |
|
| 回頂端 |
|
|
harry
註冊時間: 2006-09-10
文章: 1367
來自: Hong Kong
|
| 發表於: 星期二 六月 30, 2009 4:11 am 文章主題: |
|
|
me too
_________________
????B???.......
1. ???????????.........
2. ??厠??????????????.......
3. ??????????????....... |
|
| 回頂端 |
|
|
Icarus
註冊時間: 2009-02-05
文章: 836
|
| 發表於: 星期二 六月 30, 2009 4:35 pm 文章主題: |
|
|
?嚟, ????????RS Steam Pipe
????????????:
??Coffeesnobs ??AndyCJ ?? (??????????)
| CoffeeSnobs@AndyCJ 寫到: | Gaggia Steam Wand.
This is a quick picture guide on how to replace the steam wand on a Gaggia Carezza. This also probably applies to the classic and the evolution (or any of the Gaggia's with that stupid plastic frothing attachment) but I'm not 100% sure. I did it on the Carezza, so it's gospel for that. It's cheap too, so if it dosn't work you aren't out megabucks.
The new steam wand - ordered here in Melbourne from MocoPan from a guy named Thomas in "spare parts". It was $20 and I got a couple of o-rings for .50c each also, even thou I only used one. I got it picked up by a friend, but the postage and handling is $13 or so. So overall it's a cheap mod, with a good result. |
| 引言回覆: | Disclaimer: You could be a total dickhead, and like, TOTALLY KILL YOURSELF if you follow ANY of these instructions. Please, if you are a dickhead, seek help. If you are not, then read the whole guide first, get your head round it, and then crack on coffee soldier!
|
| 引言回覆: | 1. Here you can see the Silvia steam wand - you first remove the tip, and that stupid rubber bit (it's just asking to get covered in hot milk - gross). Also remove the female connection so it's just the plain arm (mine had a very small stainless washer also)
 |
| 引言回覆: | 2. On the Carezza you undo 2 screws, one in the water resoviour, the other on the knob for the steam (which is on top). NB: Classic and Evolution owners may be able to access the steam arm without removing the casing, if this is the case, then you're in luck. You will need access to fit a cresent spanner on the brass section above the steam arm, and another spanner to undo the wand on the stainless section. NB: Be carefull, don't just try to undo the stainless section, becasue the section above is brass, and is quite likely to SNAP! You want a firm grip on both the brass and stainless sections for ANY model.
 |
| 引言回覆: | 3. A view from the top of the Carezza. You can follow the line of the brass steam wand from the top near the steam knob, right down till it hits the opening in the casing and becomes stainless. Undo the brass steam wand from the very top of the steam section close to where the knob is on top and remove the arm completely.
 |
| 引言回覆: | 4. This is what the whole arm looks like, you can see the brass bit which is inside the machine, and the nice stainless bit at the end. It's too short... it's gotta go!
 |
?????????, ???Baby ?????, ?????????
| 引言回覆: | 5. Undo the Stainless Gaggia steam arm from the brass section, and slide the male connection off the Gaggia arm. Again, carefull with the soft brass.
 |
| 引言回覆: |
6. Now put a single o-ring on the Silvia arm and slide it up. Now put the male connection from the Gaggia arm on the Silvia arm. Now re-screw the Silvia arm onto the Gaggia brass section. NB: You will be slightly alarmed at this point as it doesn't seem to fit properly. I found that with the o-ring you need to leave it a couple of turns short of a complete tighten. This means you can still move the arm around, while stopping steam coming out of the joint. It works great, let me assure you now. Don't overtighten it because you'll never be able to re-fit it throught the top of the machine. It should be FIRM, but should still move.
 |
??????, Gaggia ?????, ?RS Steam Pipe ?Fit
??, ????????, ?????????????????
RS ?Pipe ?????, ?????, ????????O-ring ????
| 引言回覆: |
7. Now, refit the whole steam arm (from the top of the machine). This is a right fiddle, and the most frustrating part (because you're so close!!!) But take it easy, because brass is SOFT, and likely to bend. So my advice is to just go easy. Once done, you can re-fit the lid, put on the steam knob, and BOO-YAAA! You're set to go!. I think you can see here how small the Gaggia arm (without that plastic bit) is compared to the Silvia one.
 |
| 引言回覆: |
This really is a simple mod, and bang for buck it's so bloody satisfying I don't know how I survived without it. $20 odd dollars, and about 15mins work. Smashing stuff. |
_________________
????
???????????????????????????????????????????????
???????????????????? |
|
| 回頂端 |
|
|
littlelittle
註冊時間: 2006-04-04
文章: 1725
|
| 發表於: 星期二 六月 30, 2009 4:55 pm 文章主題: |
|
|
COOL!!!!
_________________
??????? ??????? |
|
| 回頂端 |
|
|
Icarus
註冊時間: 2009-02-05
文章: 836
|
| 發表於: 星期三 七月 01, 2009 1:32 am 文章主題: ???? |
|
|
??, ?????????
| ??????? 寫到: | Rancilio Silvia Steam Pipe Size
Technical Description Fitting Ø 3/8"f
Top Elbow to Nozzle: 6"
Lower Elbow to Nozzle: 4" |
| ?? 寫到: | - ?????????????, Baby Classic?????????? (????????????Gaggia Carezza??)
- ?????? Classic & Baby(2002)?Steam Pipe ????
|
| Follow Up 寫到: | - ?????????, Baby/Evo. pipe ??? ?? ??? ?? (??????)
- ?????, ????????, ??????
|
_________________
????
???????????????????????????????????????????????
???????????????????? |
|
| 回頂端 |
|
|
|
|
您 無法 在這個版面發表文章
您 無法 在這個版面回覆文章
您 無法 在這個版面編輯文章
您 無法 在這個版面刪除文章
您 無法 在這個版面進行投票
|
|
常見問題
搜尋
會員列表
會員群組
會員註冊
個人資料
登入檢查您的私人訊息
登入
